Electric Foam Cutter 18/24W 5 cm Electric Hot Cutter Pen Styrofoam Cutting Pen Heat Cutter Tool Foam Cutter Pen with Stand Hot Cutting Tool for Foam Cutting (100 mm)

Detailed description:Product Name: Electric Foam CutterMaterial: ABS + Stainless SteelHeating core rod diameter: 2 mmPlug Standard: USStyle (Optional): Style 01: 50 mmStyle 02: 100 mm01: Heating core rod length: 55 mm02: Heating core rod length: 105 mmPlastic handle length: 130 mmHandle diameter: 19 mmStainless steel connection end length: 20 mm01: Total length of hot pen: 205 mm02: Total length of hot pen: 255 mmVoltage and current: 12V2A01: Power: 18W02: Power: 24WTemperature: 450°Socket specification: 5.5×2.1-2.5Color: BlueParts List:1×Electric Foam Cutter 1×Power Cord 1×Stand 1×Instruction ManualNotes:1. The cutting pen should not work continuously for more than 30 minutes. After more than 30 minutes, it is best to turn off the power for 5 minutes before using it.2. When cutting, wait until it melts before moving the pen. Do not use too much pressure to cut, otherwise the pen tip will break.3. When bending, do not bend directly at a right angle, otherwise it will break or short-circuit the circuit inside. You should bend >R5MM rounded corners and only bend once. Bending back and forth will break the pen tip.4. When using the cutting pen, do not operate it vertically, because the heat of the pen tip will form a chimney effect and the heat will rise vertically. The rising heat will melt the handle. It is best to have a certain inclination.5. After plugging in the power supply, it is forbidden to touch the metal part of the pen with your hands to be careful of burns.

• Premium Stainless Steel Material: This electric hot cutter pen is made of stainless steel and the handle is made of enduring plastic material. It is sturdy and enduring, and is designed for long-term use
• Purpose: This electric foam cutter can cut foam blocks, allowing you to give it a variety of shapes according to your imagination and needs. It cuts foam quickly and gently, with clean edges and no residue
• Widely Uses: The electric hot cutter tool is suitable for low-density styrofoam, creative art modeling creation, billboard production, etc
• Thermostatic Power Supply: When adjusting the temperature, you must look at the color displayed when the pen head is hot. When used for a short time, it can be adjusted to a slightly reddish color. Continuous use should not exceed 10 minutes to avoid burning the pen head. When adjusted to a low temperature and not red, it can be used continuously for 30 minutes and then cooled down for a few minutes before use
• Note: The thermostatic power supply can only lower the temperature based on the original highest temperature, and cannot increase the temperature based on the original temperature. The thermostatic power supply can adjust the temperature according to demand to extend the service life of the pen a lot, and the timely temperature adjustment makes the incision more beautiful. When the cut is too wide and uneven, the temperature of the cutting pen is too high