MECCANIXITY 10uL 1mL Plastic Lab Laboratory Liquid Pipette Fine Tips 1500in1 Set (Clear White+Blue)

What is this?Pipette tips are small, disposable tips, shaped like cones, you can attach a pipette tip to the end of a pipettor and use it to transfer the liquids. The liquid used in the pipette tip is measured in microliter (μL), or one-thousandth of a milliliter (mL).What will I get?Material: Polypropylene PlasticClear Blue Tips:Capacity: 1000μL / 1mLTop Inner Diameter: 7.4mm / 0.29"Total Size: 10x70mm / 0.4"x2.75" (Max.D*L)Clear White Tips:Capacity: 10μLTop Inner Diameter: 3.5mm/ 0.14"Total Size: 6x32mm / 0.24"x1.3" (Max.D*L)Package Contents: 500pcs x 1mL Pipette Tips; 1000pcs x 10μL Pipette TipsAre there any advantages of the product?PP is a relatively inert plastic characterized by low wettability as well as high dimensional and mechanical stability across a wide temperature range.How to use it?Pre-wet the pipette tip.Immerse the tip to the proper depth during aspiration.Pause consistently after aspiration.Use consistent plunger pressure and speed.Pull the pipette straight out.Examine the tip Before dispensing a sample.Examine the tip After dispensing a sample.Use standard mode pipetting.What should I notice?Do not put materials on tips when high-pressure treatment. Remove from device immediately, cool down then to drying.

• Pipette tips are small, disposable tips, shaped like cones, you can attach a pipette tip to the end of a pipettor and use it to transfer the liquids
• 10μL Clear White Tips: Top Inner Diameter: 3.5mm/ 0.14"; Total Size(Max.D*L): 6x32mm/ 0.24"x1.3"; 1000μL(1mL) Clear Blue Tips: Top Inner Diameter: 7.4mm/ 0.29"; Total Size: 10x70mm/ 0.4"x2.75"
• Package Contents: 1000pcs x 10μL Pipette Tips, 500pcs x 1mL Pipette Tips; Do not put materials on tips when high-pressure treatment. Remove from device immediately, cool down then to drying
• PP is a relatively inert plastic characterized by low wettability as well as high dimensional and mechanical stability across a wide temperature range
• 1.Pre-wet the pipette tip. 2.Immerse the tip to the proper depth during aspiration. 3.Pause consistently after aspiration. 4.Use consistent plunger pressure and speed. 5.Pull the pipette straight out. 6.Examine the tip Before dispensing a sample. 7.Examine the tip After dispensing a sample. 8.Use standard mode pipetting