Patco 3900R/TTRED236 3900R Embossed Removable Protective Film Tape: 2" x 36 yd., Tinted Red

Patco 3900R Embossed Removable Protective Film Tape is a polypropylene film tape used for protective masking on multiple surfaces during lamination, molding, or machining where clean removal is critical. It is specifically designed for use on embossed and textured surfaces. Can also be used as graphics protection for skis, snowboards, and other outdoor equipment where crisp graphics are critical. And for screen and direct print (130 deg;C press temp). Patco 3900R is conformable, stretchy and heat resistant (it has excellent high temperature performance). It also does not lift during molding or shaping and removes cleanly, leaving no residue after processing under a wide range of conditions. Abrasion amp; moisture resistant and offers smooth, easy unwind. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 108 ft. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores.Technical InformationCore: 3 inch diameterBacking/Carrier: embossed polypropylene filmAdhesive: rubberThickness: 4.1 mils (carrier, adhesive) 3.5 mils (carrier)Adhesion: 17 ounces per inch (to stainless steel test panel) Tensile Strength: 14 pounds per inch (longitudinal) Application Temperature: 50F to 120FService/Operating Temperature: -40F to 325FElongation: 700 %.

• Patco 3900R Embossed Removable Protective Film Tape is a polypropylene film tape used for protective masking on multiple surfaces during lamination, molding, or machining where clean removal is critical. It is specifically designed for use on textured surfaces.
• *** Since the tape is embossed it will stand out in relief (will not have a smooth feel to it). Also, Patco labels the tape as clear; however, it is not a crystal clear or completely transparent tape because of the embossment (would call it more translucent - please see photos).
• The tape can also be used as graphics protection for skis, snowboards, and other outdoor equipment where crisp graphics are critical. Can be used for screen and direct print (130C press temp). Patco 3900R is conformable, stretchy and heat resistant (it has excellent high-temperature performance).
• It also does not lift during molding or shaping and removes cleanly, leaving no residue after processing under a wide range of conditions. Abrasion and moisture resistant and offers smooth, easy unwind.
• Carrier/Backing: embossed polypropylene film. Adhesive: rubber. Thickness: 4.1 mils (carrier, adhesive) 3.5 mils (carrier). Adhesion: 17 ounces per inch (to stainless steel test panel). Tensile Strength: 14 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 325F. Application Temperature: 50F to 120F. Elongation: 700%. Core: 3-inch diameter.